For those of you who are not familiar with the mandatory steps for tiling, here is a short checklist. When wiping the ceramic-coated chamois cloth over the surface, always work in a constant side-to-side or up-and-down motion. From a scientific point of view, this is a nano-ceramic coating that forms a permanent bond to the paintwork and can only be removed by abrasion - NO chemical can dissolve the coating. It will also help keep dust, dirt, debris and anything else that might have blown into the ceramic coating while it is still wet out of your finish, too.
There are a couple of different ways to improve the efficiency and consistency of a tile application, especially if you're going to approach this type of work with a do-it-yourself approach. As for those looking to prolong the life of their nano ceramic tile, here are some additional aftercare tips to keep in mind. Although the application of a nano ceramic tile is a very simple process, it does require a little time. The last step in the tile application process is to polish off any residue that may remain on the surface.
I just bought Opti-Coat 2.0 for my brand new car and want to apply it after sanding and polishing. The first step in creating a clean canvas for the nano-ceramic coating is to remove any dirt and debris that may be on the surface. However, for a nano ceramic coating to work, there is a little more work that goes into the process of acquiring a bottle of ceramic coating and slapping it on your car. Humidity and ultraviolet sunlight are going to have less of an impact on the effectiveness and consistency of a ceramic coating's cure than temperature, but the impact they have is not entirely negligible.
Once the nano ceramic coating on your vehicle has been allowed to cure for 48 hours, you can move the vehicle outside.