The Grit Guard
A Grit Guard
is a must have for anyone wanting to
prevent adding swirls after all your hard work removing them!
Throwing your wash mitt into your bucket without one of these is
almost as bad as throwing it on the ground. Dirt and grime
particles that are rinses off of your mitt settle to the bottom
of the bucket which is where your mitt will sit without a Grit
Guard.
Place the Grit Guard Insert in the bottom of any 12" diameter
Bucket/Pail. Simply rub your mitt or brush across the Grit
Guard Insert while washing your vehicle, boat, motorcycle, or
RV. Radial surface design extracts particles and contaminants
from mitts and brushes. Gravity causes dirt to settle to the
bottom of the container. Wash water stays clean - scratch-free
clean. Four quadrants on the base calm the wash water. Insert
works great for: small parts cleaning, wet sanding, oil filter
draining...and much more! 10 1/8†diameter , 2 1/2†high weight
6 oz. Solvent resistant.
|
